CONSTRUCTION
An exhaust pipe made of stainless steel is used to reduce the weight and improve corrosion resistance.
| *1 | Exhaust Retarder | *2 | No. 1 Front Pipe |
| *3 | No. 2 Front Pipe | *4 | No. 2 Center Pipe |
| *5 | DPF Catalytic Converter | *6 | No. 1 Center Pipe |
| *7 | Tailpipe | - | - |
| *a | Ball Joint Portion | - | - |
A DPF catalytic converter is used in the center pipe to realize clean emissions.
Two ball joints are used to join the No. 2 front pipe and No. 2 center pipe, and the No. 2 center pipe and No. 1 center pipe. As a result, a simple construction and reliability are realized.
| *1 | No. 2 Front Pipe | *2 | No. 2 Center Pipe |
| *a | Gasket | - | - |
An exhaust retarder is used. The engine braking effect is boosted by closing a valve provided in the exhaust pipe and narrowing the exhaust gas passage