CONSTRUCTION
An ATC is provided for the front exhaust pipe assembly, a front oxidation catalyst and DPR catalyst are provided for the center exhaust pipe assembly, and a rear oxidation catalyst is provided for the tail exhaust pipe assembly to achieve low emissions.
| *1 | Variable Nozzle Vane Type Turbocharger Sub-assembly | *2 | Exhaust Retarder Assembly |
| *3 | Front Exhaust Pipe Assembly | *4 | No. 2 Front Exhaust Pipe Sub-assembly |
| *5 | Center Exhaust Pipe Assembly | *6 | Tail Exhaust Pipe Assembly |
| *a | After Turbo Catalyst (ATC) | *b | Front Oxidation Catalyst |
| *c | DPF Catalyst | *d | Rear Oxidation Catalyst |
Two ball joints are used to join the No. 2 front exhaust pipe sub-assembly and center exhaust pipe assembly, and center exhaust pipe assembly and tail exhaust pipe assembly. As a result, a simple construction and reliability are realized.
| *1 | No. 2 Front Pipe | *2 | No. 2 Center Pipe |
| *a | Gasket | - | - |
An exhaust retarder assembly is used. The engine braking effect is boosted by closing a valve provided in the exhaust pipe and narrowing the exhaust gas passage.