Home › Engine / Hybrid System › N04C-VJ (ENGINE CONTROL) › ECD SYSTEM › from 2021.01
NM2850E _51 Engine / Hybrid System _098266 N04C-VJ ENGINE CONTROL _0463375 ECD SYSTEM CO CONTROL F

N04C-VJ ENGINE CONTROL  ECD SYSTEM  CONTROL  ENGINE CONTROL  


FUNCTION OF MAIN COMPONENTS


a.

The main components of the engine control system are as follows:

Component Outline
ECM The ECM performs overall control of the engine control system to suit the operating conditions of the engine in accordance with the signals provided by the sensors.
Intake Air Temperature Sensor Detects the intake air temperature in the intake manifold.
Engine Coolant Temperature Sensor Detects the water temperature.
Fuel Pressure Sensor Detects the fuel pressure in the common-rail.
Fuel Temperature Sensor Detects the fuel temperature in the injection or supply pump assembly.
Turbo Pressure Sensor Detects the intake air pressure in the intake manifold.
Crankshaft Position Sensor Detects the engine speed from the crankshaft position.
Camshaft Position Sensor Identifies the cylinder from the rotation of the rotor.
Mass Air Flow Meter Sensor Sub-assembly (Includes Atmospheric Temperature Sensor) Uses a hot wire to detect the intake air flow mass.
Starter Signal Detects the starter voltage signal at the time the engine is started.
Vehicle Speed Sensor Detects the vehicle speed.
EGR Valve Position Sensor Detects the EGR valve position and sends signals to the ECM.
Accelerator Pedal Position Sensor Mounted on the accelerator pedal. Detects the position of the accelerator pedal.
Differential Pressure Sensor Measures the pressure differences in positions in front of and behind the DPF catalyst.
Exhaust Gas Temperature Sensors Detect the temperature of the exhaust gas in positions behind the After Turbo Catalyst (ATC).
No. 2 Exhaust Gas Temperature Sensors Detect the temperature of the exhaust gas in positions in front of the front oxidation catalyst.
No. 3 Exhaust Gas Temperature Sensors Detect the temperature of the exhaust gas in positions in front of the DPF catalyst.
No. 4 Exhaust Gas Temperature Sensors Detect the temperature of the exhaust gas in positions behind the DPF catalyst.
Nitrogen Oxides Sensor Detects the concentration of NOx in the exhaust gas in positions behind the rear oxidation catalyst.
Throttle Body Assembly Throttle Position Sensor Detects the opening angle of the throttle valve.
Throttle Control Motor Uses a step motor to restrict the intake passage.
Turbocharger Sub-assembly Nozzle Vane Position Sensor This sensor detects the nozzle vane position.
DC Motor Controls the variable nozzle vane according to signals from the ECM.
Injector Assembly Precisely injects fuel.
Suction Control Valve Controls the volume of fuel to be supplied to the injection or supply pump assembly.
Exhaust Retarder Solenoid with Bracket Assembly Opens and closes the exhaust retarder.
Fuel Addition Cut Valve Assembly Shuts off the fuel supply to the exhaust fuel addition injector assembly when a malfunction occurs.
Exhaust Fuel Addition Injector Assembly Adds fuel inside the exhaust manifold.
EDU Controls the volume of fuel injected by the injectors.