FUNCTION
In the common-rail system, the pressurized fuel provided by the injection or supply pump assembly is stored in the common-rail and injected by the solenoid injectors.
The common-rail system stores the fuel, which has been pressurized by the pump, in the common-rail. Because the common-rail constantly accumulates a stable injection pressure without being affected by engine speed or load, this system is able to constantly provide a stable injection pressure, even when the engine is operating at low speeds.
The ECM transmits signals to the injector solenoid valves via the EDU (Electronic Driver Unit) in order to precisely control the fuel injection timing and injection volume.
| *1 | Crankshaft Position Sensor | *2 | Accelerator Pedal Position Sensor |
| *3 | Intake Air Temperature Sensor | *4 | Engine Coolant Temperature sensor |
| *5 | Mass Air Flow Meter Sensor Sub-assembly | *6 | Camshaft Position Sensor |
| *7 | Exhaust Gas Temperature Sensor | *8 | Differential Pressure Sensor |
| *9 | Nitrogen Oxides Sensor | *10 | ECM |
| *11 | Fuel Addition Cut Valve Assembly | *12 | Exhaust Fuel Addition Injector |
| *13 | Fuel Filter Assembly | *14 | Fuel Tank Sub-assembly |
| *15 | Injection or Supply Pump Assembly | *16 | Fuel Temperature Sensor |
| *17 | Diesel Fuel Filter Assembly | *18 | Fuel Pressure Limiter |
| *19 | Injector Assembly | *20 | Common-rail Assembly |
| *21 | Fuel Pressure Sensor | *22 | EDU |
| *23 | SCV (Suction Control Valve) | - | - |