CONSTRUCTION
Pistons made of lightweight and high-temperature resistant aluminum alloy are used, and the combustion chambers are a reentrant shape in order to achieve high power output, good fuel economy, and low exhaust emissions.
Full-floating type piston pins are used. Their overall length and wall thickness have been optimized to accommodate the high power output of the engine.
Connecting rods made of cast carbon steel are used.
A cooling channel has been provided inside each piston ring groove in order to cool the piston with oil, thus improving reliability.
A ring groove insert has been provided in the top ring groove to ensure wear resistance, and the skirt has been coated to achieve high scuffing resistance.
The crankshaft is made of high-strength forged special steel.
| *1 | Piston | *2 | Connecting Rod |
| *3 | Connecting Rod Cap | *4 | Crankshaft |
| *5 | No. 1 Compression Ring | *6 | No. 2 Compression Ring |
| *7 | Oil Ring | - | - |
| *a | Cooling Channel | *b | Ring Groove Insert |
| *c | Coating | - | - |