Home › Engine / Hybrid System › N04C-VJ (EMISSION CONTROL) › EMISSION CONTROL SYSTEM › from 2021.01
NM2850E _51 Engine / Hybrid System _098269 N04C-VJ EMISSION CONTROL _0463377 EMISSION CONTROL SYSTEM GE GENERAL F

N04C-VJ EMISSION CONTROL  EMISSION CONTROL SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A blow-by gas purification system is used to forcibly introduce the blow-by gas into the intake system for combustion. As a result, blow-by gas with a large quantity of hydrocarbons is prevented from being discharged into the atmosphere.


b.

An Exhaust Gas Recirculation (EGR) system is used to reduce emissions in the exhaust gas.


c.

In order to comply with emission regulations, a Diesel Particulate Filter (DPF) catalyst is used to effectively collect and purify CO, HC and Particulate Matter (PM) contained in exhaust gas.


d.

The front oxidation catalyst installed to the center exhaust pipe assembly and the rear oxidation catalysts installed to the DPF catalyst and tail exhaust pipe assembly purify NOx by absorbing and causing a reaction between the fuel injected from the fuel addition injector and the NOx in the exhaust gas on the surface of the catalyst.