CONSTRUCTION
An active type speed sensor is used. This sensor contains a sensor IC.
The front speed sensors use a gear type rotor that is mounted on the front axle hub.
The rear speed sensors use a gear type rotor that is mounted on the rear axle hub.
| *1 | Front Speed Sensor | *2 | Steering Knuckle |
| *3 | Skid Control Rotor Front | *4 | Front Axle Hub |
| *1 | Rear Speed Sensor | *2 | Rear Axle |
| *3 | Skid Control Rotor Rear | *4 | Rear Axle Hub |
Active Type Speed Sensor
The active type speed sensor uses a sensor IC to detect magnetic field changes caused when the sensor rotor rotates, and the sensor outputs the detected information to the skid control ECU as digital pulses (vehicle speed signal).
To detect the vehicle speed, the frequency of the output pulses is used. Because the active type sensor outputs digital pulses, it can detect the vehicle speed even when the vehicle is nearly stationary.