Home › Engine / Hybrid System › 1BZ-FPE (ENGINE CONTROL) › ECM › 2017.01–2021.01
RM2850E _51 Engine / Hybrid System _073136 1BZ-FPE ENGINE CONTROL _0355838 ECM A

1BZ-FPE ENGINE CONTROL  ECM  REMOVAL  


PROCEDURE

Hide 1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Hide 67676 2.REMOVE FRONT SIDE TRIM BOARD COVER LH

a.
A398646

Remove the screw.


b.

Detach the 4 claws and 3 clips to remove the front side trim board cover LH.


Hide 89661 3.REMOVE ECM

a.
A400117

Disconnect the 3 connectors.


b.
A400118

Remove the 2 bolts, nut and the ECM.


Hide 89667E 4.REMOVE NO. 1 ECM BRACKET

a.
A400119

Remove the 2 screws and the No. 1 ECM bracket.


Hide 89668 5.REMOVE NO. 2 ECM BRACKET

a.
A400120

Remove the 2 screws and the No. 2 ECM bracket.