89668
1.INSTALL NO. 2 ECM BRACKET
Install the No. 2 ECM bracket with the 2 screws.
3.0 N*m (31 kgf*cm, 27 in.*lbf)
89667E
2.INSTALL NO. 1 ECM BRACKET
Install the No. 1 ECM bracket with the 2 screws.
3.0 N*m (31 kgf*cm, 27 in.*lbf)
3.INSTALL ECM
Install the ECM with the 2 bolts and nut.
5.5 N*m (56 kgf*cm, 49 in.*lbf)
Connect the 3 connectors.
67676
4.INSTALL FRONT SIDE TRIM BOARD COVER LH
Attach the 4 claws and 3 clips to install the front side trim board cover LH.
Install the screw.
5.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL