Home › Engine / Hybrid System › 1BZ-FPE (ENGINE CONTROL) › HEATED OXYGEN SENSOR › 2017.01–2021.01
RM2850E _51 Engine / Hybrid System _073136 1BZ-FPE ENGINE CONTROL _0355839 HEATED OXYGEN SENSOR G

1BZ-FPE ENGINE CONTROL  HEATED OXYGEN SENSOR  INSPECTION  


PROCEDURE

Hide 89465 1.INSPECT HEATED OXYGEN SENSOR

a.

Inspect the sensor heater.

i.
A062067

Measure the resistance between terminals 1 (HT) and 2 (+B) of the sensor.

Standard resistance:

11 to 16 Ω at 20°C (68°F)


If the result is not as specified, replace the heated oxygen sensor.


ii.

Measure the resistance between terminals 1 (HT) and 4 (E1) of the sensor.

Standard resistance:

10 kΩ or higher


If the result is not as specified, replace the heated oxygen sensor.