Home › Engine / Hybrid System › N04C-UH (ENGINE CONTROL) › ECM
RM2850E _51 Engine / Hybrid System _073137 N04C-UH ENGINE CONTROL _0355846 ECM A

N04C-UH ENGINE CONTROL  ECM  REMOVAL  


PROCEDURE

Hide 1.CHECK FOR INJECTOR COMPENSATION CODE

Hide 67675 2.REMOVE FRONT SIDE TRIM BOARD COVER RH (for LHD)

a.
A398646

Remove the screw.


b.

Detach the 4 claws and 3 clips to remove the front side trim board cover RH.


Hide 67676 3.REMOVE FRONT SIDE TRIM BOARD COVER LH (for RHD)

a.
A393015

Remove the screw.


b.

Detach the 4 claws and 3 clips to remove the front side trim board cover LH.


Hide 89661 4.REMOVE ECM

a.
A398638E02
0.146,0.031 0.333,0.229 0.188,0.198 10 true *A 0.167,2.385 0.354,2.583 0.188,0.198 10 true *B

Disconnect the 4 connectors.

Text in Illustration
*A for LHD
*B for RHD


b.
A398639E02
0.125,0.052 0.333,0.25 0.208,0.198 10 true *A 0.198,2.375 0.406,2.573 0.208,0.198 10 true *B

Remove the 2 bolts, nut and ECM.

Text in Illustration
*A for LHD
*B for RHD


Hide 89667E 5.REMOVE NO. 1 ECM BRACKET

a.
A398640E02
0.167,0.135 0.479,0.333 0.313,0.198 10 false *A 0.167,2.385 0.479,2.583 0.313,0.198 10 false *B

Remove the 2 screws and No. 1 ECM bracket.

Text in Illustration
*A for LHD
*B for RHD


Hide 89668 6.REMOVE NO. 2 ECM BRACKET

a.
A398641E02
0.167,0.115 0.479,0.313 0.313,0.198 10 false *A 0.146,2.552 0.458,2.75 0.313,0.198 10 false *B

Remove the 2 screws and No. 2 ECM bracket.

Text in Illustration
*A for LHD
*B for RHD