Home › Engine / Hybrid System › N04C-UH (ENGINE CONTROL) › ECM
RM2850E _51 Engine / Hybrid System _073137 N04C-UH ENGINE CONTROL _0355846 ECM A

N04C-UH ENGINE CONTROL  ECM  INSTALLATION  


PROCEDURE

Hide 89667E 1.INSTALL NO. 1 ECM BRACKET

a.

Install the No. 1 ECM bracket with the 2 screws.

Torque:

3.0 N*m (31 kgf*cm, 27 in.*lbf)



Hide 89668 2.INSTALL NO. 1 ECM BRACKET

a.

Install the No. 2 ECM bracket with the 2 screws.

Torque:

3.0 N*m (31 kgf*cm, 27 in.*lbf)



Hide 89661 3.INSTALL ECM

a.

Install the ECM with the 2 bolts and nut.

Torque:

5.5 N*m (56 kgf*cm, 49 in.*lbf)



b.

Connect the 4 connectors.


Hide 67675 4.INSTALL FRONT SIDE TRIM BOARD COVER RH (for LHD)

a.

Attach the 4 claws and 3 clips to install the front side trim board cover RH.


b.

Install the screw.


Hide 67676 5.INSTALL FRONT SIDE TRIM BOARD COVER LH (for RHD)

a.

Attach the 4 claws and 3 clips to install the front side trim board cover LH.


b.

Install the screw.


Hide 6.REGISTRATION INJECTOR COMPENSATION CODE

Hide 7.CHECK FOR INJECTOR COMPENSATION CODE

Hide 8. FUEL SUPPLY PUMP INITIALIZATION