Home › Engine / Hybrid System › N04C-UH (ENGINE CONTROL) › ACCELERATOR PEDAL
RM2850E _51 Engine / Hybrid System _073137 N04C-UH ENGINE CONTROL _0355847 ACCELERATOR PEDAL A

N04C-UH ENGINE CONTROL  ACCELERATOR PEDAL  REMOVAL  


PROCEDURE

Hide 78100 1.REMOVE ACCELERATOR PEDAL ASSEMBLY

a.
A430060

Disconnect the accelerator pedal connector.


b.

Remove the 2 bolts and the accelerator pedal assembly.

NOTICE:
·

This accelerator pedal assembly does not require lubrication. Do not apply oil or other lubrication to the accelerator pedal assembly. If applied, the accelerator pedal assembly must be replaced.

·

Do not drop or strike the accelerator pedal.

·

Do not disassemble the accelerator pedal.