Home › Engine / Hybrid System › N04C-UH (ENGINE CONTROL) › ACCELERATOR PEDAL
RM2850E _51 Engine / Hybrid System _073137 N04C-UH ENGINE CONTROL _0355847 ACCELERATOR PEDAL A

N04C-UH ENGINE CONTROL  ACCELERATOR PEDAL  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:
·

This accelerator pedal assembly does not require lubrication. Do not apply oil or other lubrication to the accelerator pedal assembly. If applied, the accelerator pedal assembly must be replaced.

·

Avoid any physical shock to the accelerator pedal.

·

Do not disassemble the accelerator pedal.



PROCEDURE

Hide 78100 1.INSTALL ACCELERATOR PEDAL ASSEMBLY

a.
A430060E02
0.646,0.708 0.781,0.896 0.135,0.188 10 true A 0.917,1.365 1.052,1.563 0.135,0.198 10 true B

Install the accelerator pedal with the 2 bolts.

Torque:

18 N*m (184 kgf*cm, 13 ft.*lbf) for bolt A

12 N*m (122 kgf*cm, 9 ft.*lbf) for bolt B



b.

Connect the accelerator pedal connector.