Home › Engine / Hybrid System › N04C-UH (ENGINE CONTROL) › CRANKSAFT POSITION SENSOR
RM2850E _51 Engine / Hybrid System _073137 N04C-UH ENGINE CONTROL _0355850 CRANKSAFT POSITION SENSOR A

N04C-UH ENGINE CONTROL  CRANKSAFT POSITION SENSOR  INSTALLATION  


PROCEDURE

Hide 11301K 1.INSTALL CRANK POSITION SENSOR

a.

Apply a light coat of engine oil to the O-ring of the sensor.


b.

Install the sensor with the bolt.

Torque:

12 N*m (122 kgf*cm, 9 ft.*lbf)



c.

Install the sensor with the bolt.


Hide 51441D 2.INSTALL NO. 1 ENGINE UNDER COVER (for Plastic Type)

Hide 51441D 3.INSTALL NO. 1 ENGINE UNDER COVER (for Metal Type)

Hide 51459 4.INSTALL ENGINE SIDE COVER STAY (for TCAP Made)