Home › Engine / Hybrid System › N04C-UH (ENGINE CONTROL) › INTAKE AIR TEMPERATURE SENSOR
RM2850E _51 Engine / Hybrid System _073137 N04C-UH ENGINE CONTROL _0355852 INTAKE AIR TEMPERATURE SENSOR A

N04C-UH ENGINE CONTROL  INTAKE AIR TEMPERATURE SENSOR  REMOVAL  


PROCEDURE

Hide 58521D 1.REMOVE ENGINE SERVICE HOLE COVER MAT (w/ Carpet)

Hide 58410 2.REMOVE ENGINE SERVICE HOLE COVER

Hide 89424G 3.REMOVE INTAKE AIR TEMPERATURE SENSOR

a.
A226333

Disconnect the intake air temperature sensor connector.


b.

Remove the bolt.


c.

Disconnect the wire harness clamp.


d.

Remove the bracket from the intake air temperature sensor connector.


e.
A226332

Using a union nut wrench, remove the intake air temperature sensor and gasket.

NOTICE:

Do not damage the intake air temperature sensor.