Home › Engine / Hybrid System › N04C-UH (ENGINE CONTROL) › INTAKE AIR TEMPERATURE SENSOR
RM2850E _51 Engine / Hybrid System _073137 N04C-UH ENGINE CONTROL _0355852 INTAKE AIR TEMPERATURE SENSOR A

N04C-UH ENGINE CONTROL  INTAKE AIR TEMPERATURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89424G 1.INSTALL INTAKE AIR TEMPERATURE SENSOR

a.

Install a new gasket to the intake air temperature sensor.


b.

Using a union nut wrench, install the intake air temperature sensor.

Torque:

20 N*m (200 kgf*cm, 14 ft.*lbf)


NOTICE:

Do not damage the intake air temperature sensor.



c.

Install the bracket to the intake air temperature sensor connector.


d.

Connect the wire harness clamp.


e.

Install the bracket with the bolt.

Torque:

29 N*m (291 kgf*cm, 21 ft.*lbf)



f.

Connect the intake air temperature sensor connector.


Hide 58410 2.INSTALL ENGINE SERVICE HOLE COVER

Hide 58521D 3.INSTALL ENGINE SERVICE HOLE COVER MAT (w/ Carpet)