Home › Drivetrain › A444E (AUTOMATIC TRANSMISSION / TRANSAXLE) › FLOOR SHIFT ASSEMBLY › 2017.01–2021.01
RM2850E _52 Drivetrain _073139 A444E AUTOMATIC TRANSMISSION / TRANSAXLE _0355871 FLOOR SHIFT ASSEMBLY G

A444E AUTOMATIC TRANSMISSION / TRANSAXLE  FLOOR SHIFT ASSEMBLY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT SHIFT LEVER POSITION

a.

When shifting the lever from P to the R position with the ignition switch ON and the brake pedal depressed, make sure that the shift lever moves smoothly and moves correctly into position.


b.

Check that the starter operates when the shift lever is in the P or N position, but does not operate in other positions.


c.

Operate the shift lever and check that the reading on the indicator conforms to the actual position.


d.

Check that the shift lever can be moved from the P position to another when the shift release button is pressed.


e.

Start the engine and make sure that the vehicle moves forward when shifting the lever from N to the D position and moves rearward when shifting the lever to the R position.

If the operation cannot be performed as specified, inspect the park/neutral position switch assembly and check the transmission control cable assembly installation condition.