Home › Drivetrain › A444E (AUTOMATIC TRANSMISSION / TRANSAXLE) › FLOOR SHIFT ASSEMBLY › 2017.01–2021.01
RM2850E _52 Drivetrain _073139 A444E AUTOMATIC TRANSMISSION / TRANSAXLE _0355871 FLOOR SHIFT ASSEMBLY A

A444E AUTOMATIC TRANSMISSION / TRANSAXLE  FLOOR SHIFT ASSEMBLY  REMOVAL  


PROCEDURE

Hide 1.SECURE VEHICLE

a.
C368705

Fully apply the parking brake and chock a wheel.

CAUTION:
·

Make sure to apply the parking brake and chock a wheel before performing this procedure.

·

If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.




Hide 2.REMOVE SHIFTING HOLE COVER

a.

Move the shift lever to N.


b.
C367962

Remove the 4 screws.


c.
C367963

When sliding the shift lever, pull the shifting hole cover diagonally to remove it.

Text in Illustration
V113147

Removal Direction


Hide 3.DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

a.
C102377

Remove the clip, washer and disconnect the transmission control cable assembly from the transmission floor shift assembly.


Hide 4.REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY

a.
C367964

Disconnect the 2 connectors from the transmission floor shift assembly.


b.
C273934

Remove the 4 bolts and transmission floor shift assembly.