1.DISCONNECT CABLE FROM NEGATIVE TERMINAL
33820B
2.DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
Remove the nut and clip.
Disconnect the transmission control cable assembly.
35573
3.REMOVE TRANSMISSION CONTROL SHAFT LEVER LH
Disconnect the park/neutral position switch connector.
Remove the 2 nuts and transmission control shaft lever LH.
84540
4.REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY
Using a screwdriver, pry out the lock washer.
Remove the lock nut and lock washer.
Remove the 2 bolts and park/neutral position switch.