Home › Drivetrain › A444E (AUTOMATIC TRANSMISSION / TRANSAXLE) › PARK / NEUTRAL POSITION SWITCH › 2017.01–2021.01
RM2850E _52 Drivetrain _073139 A444E AUTOMATIC TRANSMISSION / TRANSAXLE _0355879 PARK / NEUTRAL POSITION SWITCH G

A444E AUTOMATIC TRANSMISSION / TRANSAXLE  PARK / NEUTRAL POSITION SWITCH  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 84540 1.INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

a.

Apply the parking brake and turn the ignition switch to the ON position.


b.

Depress the brake pedal and check that the engine starts when the shift lever is set in the N or P position, but does not start in other positions.


c.

Check that the back-up light comes on and the reverse warning buzzer sounds only when the shift lever is set in the R position, but do not function in other positions.

If a failure is found, check the park/neutral position switch assembly for continuity.