84640C
1.REMOVE EXHAUST RETARDER SWITCH ASSEMBLY
w/ Exhaust Brake:
Disconnect the connector and detach the clamp.
| *A | w/ Clutch Booster |
| *B | w/o Clutch Booster |
Remove the lock nut and exhaust retarder switch assembly from the pedal bracket sub-assembly.
2.REMOVE CLUTCH PEDAL STOPPER BOLT
w/o Exhaust Brake:
Remove the lock nut and clutch pedal stopper bolt from the pedal bracket sub-assembly.
31453A
3.REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS WITH HOLE PIN
Remove the clip and clutch master cylinder push rod clevis with hole pin.
31301
4.REMOVE CLUTCH PEDAL SUB-ASSEMBLY
Disconnect the hook of the clutch pedal spring from the pedal bracket sub-assembly.
Remove the nut, spring washer, bolt and clutch pedal sub-assembly from the pedal bracket sub-assembly.
| *A | w/ Clutch Booster |
| *B | w/o Clutch Booster |
31301A
5.REMOVE CLUTCH PEDAL SPRING
Remove the clutch pedal spring from the clutch pedal sub-assembly.
31301C
6.REMOVE CLUTCH PEDAL BUSH
Remove the 2 clutch pedal bushes and the clutch pedal shaft collar from the clutch pedal sub-assembly.
| *A | w/ Clutch Booster |
| *B | w/o Clutch Booster |
| *1 | Clutch Pedal Shaft Collar |
| *2 | Clutch Pedal Bush |
31301B
7.REMOVE NO. 1 CLUTCH PEDAL CUSHION
Remove the No. 1 clutch pedal cushion from the clutch pedal sub-assembly.
31453B
8.REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS BUSH
Using a hexagon wrench (8 mm) and plastic-faced hammer, remove the clutch master cylinder push rod clevis bush from the clutch pedal sub-assembly.
31321
9.REMOVE CLUTCH PEDAL PAD
Remove the clutch pedal pad from the clutch pedal sub-assembly.