Home › Drivetrain › CLUTCH › CLUTCH MASTER CYLINDER
RM2850E _52 Drivetrain _073140 CLUTCH _0355887 CLUTCH MASTER CYLINDER A

CLUTCH  CLUTCH MASTER CYLINDER  REMOVAL  


PROCEDURE

Hide 55301 1.REMOVE INSTRUMENT PANEL SUB-ASSEMBLY

Hide 31434 2.DISCONNECT CLUTCH RESERVOIR TUBE

a.

Slide the clamp and disconnect the clutch reservoir tube from the clutch master cylinder assembly.


Hide 31481K 3.DISCONNECT MASTER CYLINDER TO TUBE CONNECTOR TUBE

a.
C367388

w/o Clutch Booster:

Using a union nut wrench (12 mm), disconnect the master cylinder to tube connector tube from the clutch master cylinder assembly.


b.
C367387

w/ Clutch Booster:

Using a union nut wrench (12 mm), disconnect the master cylinder to tube connector tube from the clutch master cylinder assembly.


Hide 31410 4.REMOVE CLUTCH MASTER CYLINDER ASSEMBLY

a.

w/o Clutch Booster:

i.

Remove the clip and the clutch master cylinder push rod clevis with hole pin, and disconnect the push rod clevis from the clutch pedal sub-assembly.


ii.

Remove the 2 bolts and clutch master cylinder assembly from the pedal bracket sub-assembly.



b.

w/ Clutch Booster:

i.

Remove the 2 nuts and clutch master cylinder assembly from the clutch booster assembly (w/ air cleaner).