04311
1.INSTALL CLUTCH MASTER CYLINDER KIT
w/o Clutch Booster:
Apply lithium soap base glycol grease to a new piston.
|
Lithium soap base glycol grease |
Insert the piston straight into the cylinder body.
Be careful not to damage the inside of the cylinder body.
Install a new stop plate to the push rod.
Install the push rod to the cylinder body.
While pushing the push rod, using snap ring pliers, install a new snap ring.
Install the boot to the cylinder body.
Install the lock nut to the push rod.
Using a vernier caliper, adjust the push rod to the measured dimension (A).
Install the push rod clevis to the push rod and tighten the lock nut.
12 N*m (120 kgf*cm, 9 ft.*lbf)
w/ Clutch Booster:
Apply lithium soap base glycol grease to a new piston.
|
Lithium soap base glycol grease |
Insert the piston straight into the cylinder body.
Be careful not to damage the inside of the cylinder body.
Using a snap ring pliers, install a new snap ring.