04313
1.INSTALL CLUTCH RELEASE CYLINDER KIT
Install a new spring to the cylinder body.
Install the smaller end of the spring to the piston.
Coat a new piston with lithium soap base glycol grease as shown in the illustration.
|
Lithium soap base glycol grease |
Install the piston to the cylinder body.
Do not damage the inside of the cylinder body.
31476
2.INSTALL CLUTCH RELEASE CYLINDER BOOT
Install the No. 1 clutch release cylinder push rod and a new clutch release cylinder boot to the cylinder body.
31477
3.INSTALL RELEASE CYLINDER BLEEDER PLUG
Install the release cylinder bleeder plug to the cylinder body.
11 N*m (110 kgf*cm, 8 ft.*lbf)
Install the release cylinder bleeder plug cap to the release cylinder bleeder plug.