Home › Drivetrain › CLUTCH › CLUTCH UNIT (for M15#)
RM2850E _52 Drivetrain _073140 CLUTCH _0355890 CLUTCH UNIT(for M15#) G

CLUTCH  CLUTCH UNIT(for M15#)  INSPECTION  


PROCEDURE

Hide 31250 1.INSPECT CLUTCH DISC ASSEMBLY

a.
C372027

Using vernier calipers, measure the rivet head depth.

Minimum Rivet Depth:

0.3 mm (0.0118 in.)


If necessary, replace the clutch disc assembly.


b.

Install the clutch disc assembly onto the manual transmission assembly.

NOTICE:

Insert the clutch disc assembly in the correct orientation.



c.
C372028

Using a dial indicator, check the clutch disc assembly runout.

Maximum Runout:

0.8 mm (0.0315 in.)


Text in Illustration
V100135

Manual Transmission Assembly Side

If necessary, replace the clutch disc assembly.


Hide 31210 2.INSPECT CLUTCH COVER ASSEMBLY

a.
C372029N01
0.438,0.563 0.594,0.76 0.156,0.198 10 false A 1.135,0.354 1.292,0.552 0.156,0.198 10 false B

Using vernier calipers, inspect the depth and width of wear of the diaphragm spring.

Maximum:
A (Depth):

0.6 mm (0.0236 in.)

B (Width):

5.0 mm (0.197 in.)


If necessary, replace the clutch cover assembly.


Hide 13405 3.INSPECT FLYWHEEL SUB-ASSEMBLY

a.
C103832

Using a dial indicator, inspect the flywheel sub-assembly runout.

Maximum Runout:

0.1 mm (0.00394 in.)


If necessary, replace the flywheel sub-assembly.


Hide 31230 4.INSPECT CLUTCH RELEASE BEARING ASSEMBLY

a.
N000414

Turn the clutch release bearing assembly by hand while applying force in the axial direction.

HINT:

The clutch release bearing assembly is permanently lubricated and requires no cleaning or lubrication.

If necessary, replace the clutch release bearing assembly.