If there is leakage or lack of vacuum, repair before testing.
1. OPERATION CHECK
With the engine stopped, depress the clutch pedal several times. Then, with the pedal at the mid point, start the engine and confirm that the pedal sinks down slightly.
2. AIR-TIGHTNESS CHECK
Depress the clutch pedal several times with the engine stopped. Then, start the engine and depress the clutch pedal and check that there is a light difference in pedal effort.
Start the engine and turn it off after is sufficient vacuum in the booster. Depress the clutch pedal and confirm that the effort required for at least one time is equal to that with the engine running.
If (a) and (b) are not as stipulates, inspect the vacuum check valve and if necessary, the clutch booster also.