Home › Vehicle Interior › METER / GAUGE / DISPLAY › COMBINATION METER
RM2850E _58 Vehicle Interior _073141 METER / GAUGE / DISPLAY _0355895 COMBINATION METER A

METER / GAUGE / DISPLAY  COMBINATION METER  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:

When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.


HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for RHD vehicles.



PROCEDURE

Hide 55410C 1.REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

Hide 83100 2.REMOVE COMBINATION METER ASSEMBLY

a.
B467536

Remove the 2 screws and combination meter assembly.


b.

Disconnect the 2 connectors.