Home › Engine / Hybrid System › N04C-VQ (ENGINE MECHANICAL) › CYLINDER HEAD
RM2850E _51 Engine / Hybrid System _073144 N04C-VQ ENGINE MECHANICAL _0355910 CYLINDER HEAD A

N04C-VQ ENGINE MECHANICAL  CYLINDER HEAD  DISASSEMBLY  


PROCEDURE

Hide 13711 1.REMOVE INTAKE VALVE

a.
A403289E01
1.75,0.906 1.979,0.365 1.979,0.365 2.25,0.365 true 2.323,0.281 2.781,0.479 0.458,0.198 10 false SST

Using SST, remove the valve spring retainer locks, then remove the valve spring retainer, inner compression spring and intake valve.

SST
09202-00021  09202-70020  (09202-01010, 09202-01020, 90154-80004)

HINT:

Keep the removed parts in the correct order so that they can be returned to their original positions when reassembled.



Hide 13715 2.REMOVE EXHAUST VALVE

a.
A146605E01
2.605,0.059 2.981,0.239 0.376,0.18 10 SST 1.776,0.904 2.401,0.138 2.401,0.138 2.588,0.138 false

Using SST, remove the valve spring retainer locks, then remove the valve spring retainer, inner compression spring and exhaust valve.

SST
09202-00021  09202-70020  (09202-01010, 09202-01020, 90154-80004)

HINT:

Keep the removed parts in the correct order so that they can be returned to their original positions when reassembled.



Hide 13711E 3.REMOVE INTAKE VALVE STEM OIL SEAL

a.

Using needle-nose pliers, remove the intake valve stem oil seal.


Hide 13715A 4.REMOVE EXHAUST VALVE STEM OIL SEAL

a.

Using needle-nose pliers, remove the exhaust valve stem oil seal.


Hide 5.REMOVE STUD BOLT

HINT:

If a stud bolt is deformed or its threads are damaged, replace it.


a.

Using E8 and E10 "TORX" socket wrenches, remove the stud bolts.