1.REPAIR VALVE SEAT
When grinding, wear safety glasses to protect your eyes from metal shards.
Gradually release the seat cutter pressure to make the valve seat surface smoother.
If the seating is too high on the valve face, use 30° and 45° cutters to correct the seat.
| Item | Specified Condition |
|---|---|
| Intake | 0.8 to 1.0 mm (0.0315 to 0.0394 in.) |
| Exhaust | 1.8 to 2.0 mm (0.0709 to 0.0788 in.) |
| *a | Intake Side |
| *b | Exhaust Side |