1.REMOVE VALVE LIFTERS AND SHIMS
Arrange the valve lifters and shims in correct order.
2.REMOVE VALVES
Using SST, compress the valve spring and remove the two keepers.
Remove the spring retainer, valve spring, valve and spring seat.
Arrange the valves, valve springs, spring seats and spring retainers in correct order.
Using needle-nose pliers, remove the oil seal.
3.REMOVE COMBUSTION CHAMBERS (1PZ and 1HZ)
Using SST, remove the five (1PZ) and six (1HZ) combustion chambers (and shims).
Arrange the combustion chambers (and shims) in correct order.
4.REMOVE HALF CIRCULAR PLUG
5.REMOVE FRONT AND REAR ENGINE HANGERS