Home › Engine / Hybrid System › 1HZ (ENGINE MECHANICAL) › CYLINDER BLOCK
RM2850E _51 Engine / Hybrid System _073150 1HZ ENGINE MECHANICAL _0355948 CYLINDER BLOCK A

1HZ ENGINE MECHANICAL  CYLINDER BLOCK  CYLINDER BORING  


CAUTION / NOTICE / HINT

HINT:
·

Bore all five (1PZ) or six (1HZ and 1HD-T) cylinders for the oversized piston outside diameter.

·

Replace the piston rings with ones to match the oversized pistons.



PROCEDURE

Hide 1.KEEP OVERSIZED PISTONS

Oversized piston diameter:
O/S 0.50:

94.45 - 94.48 mm (3.7185 - 3.7197 in.)


Hide 2. CALCULATE AMOUNT TO BORE CYLINDER

a.
A422447

Using a micrometer, measure the piston diameter at right angles to the piston pin center line, at the indicated distance from the piston head.

Distance:

1PZ and 1HZ 58.6 mm (2.3071 in.)

1HD-T 65.7 mm (2.5866 in.)



b.

Calculate the amount each cylinder is to be rebored as follows:

Size to be rebored = P + C - H

P = Piston diameter

C = Piston oil clearance

0.02 mm (0.0008 in.) or less


H = Allowance for honing

0.02 mm (0.0008 in.) or less




Hide 3. BORE AND HONE CYLINDERS TO CALCULATED DIMENSIONS

Maximum honing:

0.02 mm (0.0008 in.)


NOTICE:

Excess honing will destroy the finished roundness.