Home › Engine / Hybrid System › 1HZ FUEL › FUEL FILTER
RM2850E _51 Engine / Hybrid System _073151 1HZ FUEL _0355957 FUEL FILTER A

1HZ FUEL  FUEL FILTER  REPLACEMENT  


PROCEDURE

Hide 1.DISCONNECT FUEL FILTER WARNING SWITCH CONNECTOR

Hide 2.DRAIN FUEL FROM FUEL FILTER

a.

Connect a vinyl hose to the drain cock, and insert the other end of the vinyl hose in a container.


b.

Loosen the drain plug, and drain the fuel.


Hide 23300J 3.REPLACE FUEL FILTER

a.
A423063

Remove fuel filter

Using SST, remove the fuel filter.

SST
09228-64010  


b.
A423064

Remove fuel filter warning switch from fuel filter

Using pliers, remove the warning switch.and O-ring.

NOTICE:

Be careful not to damage the warning switch.



c.
A423065

Install fuel filter warning switch to new fuel filter

i.

Install a new O-ring to the warning switch.


ii.

Apply fuel to the O-ring of the warning switch.


iii.
A423066

Install the warning switch to a new fuel filter by hand.



d.
A423067

Install new fuel filter

i.

Check and clean the fuel filter installation surface.


ii.

Apply fuel to the gasket of a new fuel filter.


iii.
A423068

Lightly screw the fuel filter into place, and tighten it until the gasket comes into contact with the seat.


iv.

Tighten it additional 3/4 turn by hand.



Hide 4. FILL FUEL FILTER WITH FUEL

a.
A423069

Operate the hand pump until you feel more resistance.


Hide 5.CONNECT FUEL FILTER WARNING SWITCH CONNECTOR

Hide 6.START ENGINE AND CHECK FOR FUEL LEAKS