Home › Engine / Hybrid System › 1HZ (LUBRICATION) › OIL AND OIL FILTER
RM2850E _51 Engine / Hybrid System _073154 1HZ LUBRICATION _0355965 OIL AND OIL FILTER G

1HZ LUBRICATION  OIL AND OIL FILTER  INSPECTION  


PROCEDURE

Hide 1.CHECK ENGINE OIL QUALITY

a.
A423119

Check the oil for deterioration, entry of water, discoloring or thinning.

If the quality is visibly poor, replace the oil.

Oil grade:

API CF-4 (You may also use API CF, CE or CD)


If you use SAE 10W-30 or higher viscosity oil in extremely low temperatures, the engine may became difficult to start, so SAE 5W-30 engine oil is recommended.


Hide 2.CHECK ENGINE OIL LEVEL

a.

After warming up the engine and then 5 minutes after the engine stop, oil level should be between "L" and "F" of the dipstick.

If low, check for leakage and add oil up to "F" mark.

NOTICE:

Do not fill with engine oil above the "F" mark.