Home › Engine / Hybrid System › 1HZ STARTING › STARTER
RM2850E _51 Engine / Hybrid System _073156 1HZ STARTING _0355971 STARTER A

1HZ STARTING  STARTER  STARTER PREFORMANCE TEST  


CAUTION / NOTICE / HINT

NOTICE:

These tests must be performed within 3 to 5 seconds to avoid burning out the coll.


PROCEDURE

Hide 1. DO PULL-IN TEST

a.
A423201

Disconnect the field coil lead wire from terminal C.


b.

Connect the battery to the magnetic switch as shown.

Check that the clutch pinion gear moves outward.


Hide 2. DO HOLD-IN TEST

a.
A423202

With battery connected as above with the clutch pinion gear out, disconnect the negative (-) lead from terminal C. Check that the pinion gear remains out.


Hide 3.INSPECT CLUTCH PINION GEAR RETURN

a.
A423203

Disconnect the negative (-) lead from the switch body.

Check that the clutch pinion gear returns inward.


Hide 4. DO NO-LOAD PERFORMANCE TEST

a.

Connect the battery and ammeter to the starter as shown.


b.
A423204

Check that the starter rotates smoothly and steadily with the pinion gear moving out. Check that the ammeter shows the specified current.

Specified current:
12 V type:

At 11.0 V: 180 A or less

24 V type:

At 23.0 V: 90 A or less