1.INSPECT VOLTAGE CONVERTER TIMER
LOCATION: In the cowl on the passenger's side.
Disconnect the connector from the voltage converter timer, and check the connector on the wire harness side as shown in the following chart.
| Check for | Tester connection | Condition | Specified value |
|---|---|---|---|
| Voltage | 1 - Ground | Turn starter switch OFF | No voltage |
| Turn starter switch START | Battery voltage | ||
| Voltage | 2 - Ground | Turn starter switch OFF | No voltage |
| Turn starter switch ON | Battery voltage | ||
| Voltage | 3 - Ground | Turn starter switch OFF | No voltage |
| Turn starter switch START | Battery voltage | ||
| Continuity | 4 - Ground | - | Continuity |
| Continuity | 5 - 6 | - | Continuity |
| Continuity | 7 - Ground | - | Continuity |