Home › Engine / Hybrid System › 1HZ STARTING › 24 V HOLD WARNING RELAY (HZJ80 and HDJ80)(w/ 24 V Starter)
RM2850E _51 Engine / Hybrid System _073156 1HZ STARTING _0355977 24 V HOLD WARNING RELAY (HZJ80 and HDJ80)(w/ 24 V Starter) G

1HZ STARTING  24 V HOLD WARNING RELAY (HZJ80 and HDJ80)(w/ 24 V Starter)  INSPECTION  


PROCEDURE

Hide 1.INSPECT RELAY CONTINUITY

a.
A423125

LOCATION: In the driver's cowl side.

i.
A423126

Using an ohmmeter, check that there is continuity between terminals 1 and 3.


ii.

Check that there is no continuity is not as specified, replace the terminals 2 and 4.

If continuity is not as specified, replace the relay.



Hide 2.INSPECT RELAY OPERATION

a.
A423125

LOCATION: In the driver's cowl side.

i.
A423127

Apply battery voltage across terminals 1 and 3.


ii.

Using an ohmmeter, check that there is continuity between terminals 2 and 4.

If operation is not as specified, replace the relay.