Home › Engine / Hybrid System › 1HZ STARTING › STARTER RELAY(for HZB and HDB)
RM2850E _51 Engine / Hybrid System _073156 1HZ STARTING _0355980 STARTER RELAY(for HZB and HDB) G

1HZ STARTING  STARTER RELAY(for HZB and HDB)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT RELAY CONTINUITY

a.
A423138

LOCATION: Inside wall adjacent to center door.

i.
A423139

Using an ohmmeter, check that there is continuity between terminals E and ST.


ii.

Check that there is no continuity between terminals B and MG.

If continuity is not as specified, replace the relay.



Hide 2.INSPECT RELAY OPERATION

a.
A423138

LOCATION: Inside wall adjacent to center door.

i.
A423140

Apply battery voltage across terminals E and ST.


ii.

Using an ohmmeter, check that there is continuity between terminals B and MG.

If operation is not as specified, replace the relay.