Home › Engine / Hybrid System › 1HZ STARTING › STARTER RELAY
RM2850E _51 Engine / Hybrid System _073156 1HZ STARTING _0355981 STARTER RELAY G

1HZ STARTING  STARTER RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 28300 1.REMOVE STARTER RELAY

Hide 2.INSPECT RELAY CONTINUITY

a.
A423145

w/ 12 V Starter:

i.

Using an ohmmeter. check that there is continuity between terminals 3 and 4.


ii.

Check that there is no continuity between terminals 1 and 2.

If continuity is not as specified, replace the relay.



b.
A423146

w / 24 V Starter:

i.

Using an ohmmeter, check that there is continuity between terminals 1 and 2.


ii.

Check that there is no continuity between terminals 3 and 4.

If continuity is not as specified, replace the relay.



Hide 3.INSPECT RELAY OPERATION

a.
A423147

w/ 12 V Starter:

i.

Apply battery voltage across terminals 3 and 4.


ii.

Using an ohmmeter, check that there is continuity between terminals 1 and 2.

If operation is not as specified, replace the relay.



b.
A423148

w/ 24 V Starter:

i.

Apply battery voltage across terminals 1 and 2.

NOTICE:

If the vehicle hes a voltage converter, do the check using a 12 V battery.



ii.

Using an ohmmeter, check that there is continuity between terminals 3 and 4.

If operation is not as specified, replace the relay.



Hide 28300 4.REINSTALL STARTER RELAY