Home › Engine / Hybrid System › 1HZ STARTING › STARTER RELAY
RM2850E _51 Engine / Hybrid System _073156 1HZ STARTING _0355981 STARTER RELAY G

1HZ STARTING  STARTER RELAY  INSPECTION  


PROCEDURE

Hide 28300 1.REMOVE STARTER RELAY

a.

LOCATION: Inside wall adjacent to center door.


Hide 28300 2.INSPECT STARTER RELAY

a.
A423212

Inspect the relay continuity.

i.

Using an ohmmeter, check that there is continuity between terminals 1 and 2.

If there is no continuity, replace the relay.


ii.

Check that there is no continuity between terminals 3 and 5.

If there is continuity, replace the relay.



b.
A423213

Inspect the the relay operation.

i.

Apply battery voltage across the terminals 1 and 2.


ii.

Using an ohmmeter, check that there is continuity between terminals 3 and 5.

If there is no continuity, replace the relay.



Hide 28300 3.REINSTALL STARTER RELAY