13711
1.REMOVE INTAKE VALVE
Using SST, remove the retainer lock and remove the retainer, compression spring and valve.
Organize the parts so that each part location can be remembered for reassembly.
13715
2.REMOVE EXHAUST VALVE
Using SST, remove the retainer lock and remove the retainer, compression spring and valve.
Organize the parts so that each part location can be remembered for reassembly.
3.REMOVE VALVE STEM OIL SHIELD
Using needle-nose pliers, remove the oil shield.
Organize the parts so that each part location can be remembered for reassembly.
4.REMOVE STUD BOLT
Remove the 10 stud bolts.
| *a | Intake Manifold Side |
| *b | Exhaust Manifold Side |