1.REPAIR VALVE SEAT
Gradually release the seat cutter pressure to make the valve seat surface smoother.
If the seating is too high on the valve face, use 30° and 45° cutters to correct the seat.
0.8 to 1.0 mm (0.0315 to 0.0394 in.)
1.8 to 2.0 mm (0.0709 to 0.0787 in.)
| *a | Intake Side |
| *b | Exhaust Side |
When grinding, the valve tips may break off on impact. Wear safety glasses to protect your eyes.