1.INSPECT FOR FUEL PRESSURE
Read the Data List.
Warm up the engine.
Turn the ignition switch off.
Connect the GTS to the DLC3.
Start the engine.
Turn the GTS on.
Enter the following menus: Powertrain / Engine and ECT / Data List.
Read the Data List.
| GTS Display | Measurement: Range (Display) | Normal Condition |
|---|---|---|
| Fuel Press | Fuel pressure: Min.: 0 kPa, Max.: 655350 kPa | Idling: 25000 to 35000 kPa |
2.INSPECT FOR FUEL LEAK
Perform the Active Test.
Connect the GTS to the DLC3.
Start the engine.
Turn the GTS on.
Enter the following menus: Powertrain / Engine and ECT / Active Test.
Perform the Active Test.
| GTS Display | Test Details | Control Range | Diagnostic Notes |
|---|---|---|---|
| Test the Fuel Leak | Increasing common rail internal fuel pressure, and checking for fuel leaks | Stop/Start | ·
Fuel pressure inside common rail brought to specified value and engine speed increased to 2000 rpm when Start is selected ·
Above conditions to be maintained while start is selected |