1.DISCONNECT FUEL FILTER WARNING SWITCH CONNECTOR
2.DRAIN FUEL FROM FUEL FILTER
Install a vinyl hose to the drain cock, and insert the other end of the vinyl hose in a container.
Loosen the drain plug, and drain the fuel.
3.REPLACE FUEL FILTER
Remove fuel filter
Using SST, remove the fuel filter.
Remove fuel filter warning switch from fuel filter
Using pliers, remove the warning switch and O-ring.
Ba careful not to damage the warning switch.
Install fuel filter warning switch to new fuel filter
Install a new O-ring to the warning switch.
Apply fuel to the O-ring of the warning switch.
Install the warning switch to a new fuel filter by hand.
Install new fuel filter
Check and clean the fuel filter installation surface.
Apply fuel to the gasket of a new fuel filter.
Lightly screw the fuel filter into place, and tighten it until the gasket comes into contact with the seat.
Tighten it additional 3/4 turn by hand.
4.FILL FUEL FILTER WITH FUEL
Operate the hand pump until you feel more resistance.
5.CONNECT FUEL FILTER WARNING SWITCH CONNECTOR
6. ENGINE AND CHECK FOR FUEL LEAKS