Home › Engine / Hybrid System › 14B (FUEL) › FUEL SENDER GAUGE ASSEMBLY › 2017.01–2019.08
RM2850E _51 Engine / Hybrid System _073168 14B FUEL _0356042 FUEL SENDER GAUGE ASSEMBLY A

14B FUEL  FUEL SENDER GAUGE ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 1.INSTALL FUEL SUCTION TUBE SET GASKET

a.

Install the fuel suction tube set gasket to the fuel sender gauge assembly.


Hide 83320 2.INSTALL FUEL SENDER GAUGE ASSEMBLY

a.

Install a new gasket and the fuel sender gauge assembly with the 5 screws.

Torque:

1.5 N*m (15 kgf*cm, 13 in.*lbf)



b.

Connect the sender gauge assembly connector.


Hide 58750 3.INSTALL FUEL TANK INSPECTION HOLE COVER ASSEMBLY

a.

Install the fuel tank inspection hole cover assembly with the 2 screws.