Home › Engine / Hybrid System › 14B (COOLING) › COOLING SYSTEM › 2017.01–2019.08
RM2850E _51 Engine / Hybrid System _073169 14B COOLING _0356044 COOLING SYSTEM G

14B COOLING  COOLING SYSTEM  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.CHECK ENGINE COOLANT LEVEL AT RADIATOR RESERVOIR

The engine coolant level should be between the "LOW" and "FULL" lines.

If low, check for leaks and add engine coolant up to the "FULL" line.

Hide 2.CHECK ENGINE COOLANT QUALITY

a.

Remove the radiator cap from the water filler (BB) or water outlet (BU).

CAUTION:

To avoid the danger of being burned, do not remove the radiator cap while the engine and radiator are still hot, as fluid and steam can be blown out under pressure.



b.

There should not be any excessive deposits of rust or scale around the radiator cap, water filler hole (BB) water outlet hole (BU), and the coolant should be free from oil.

If excessively dirty, replace the coolant.


c.

Reinstall the radiator cap.