Home › Engine / Hybrid System › 14B (COOLING) › WATER PUMP › 2017.01–2019.08
RM2850E _51 Engine / Hybrid System _073169 14B COOLING _0356046 WATER PUMP A

14B COOLING  WATER PUMP  WATER PUMP REMOVAL  


PROCEDURE

Hide 1.DRAIN ENGINE COOLANT

Hide 2.REMOVE DRIVE BELT(S), FAN, FLUID COUPLING AND WATER PUMP PULLEY (w/ Fluid Coupling)

a.

Loosen the 4 water pump pulley nuts.


b.

Loosen the alternator pivot bolt and adjusting bolt, and remove the drive belt(s).


c.

Remove the 4 nuts, the fan, fluid coupling assembly and pulley.


d.

Remove the 4 nuts and fan from the fluid coupling.


Hide 3.REMOVE DRIVE BELT, FAN, FAN SPACER AND WATER PUMP PULLEY (w/o Fluid Coupling)

a.

Loosen the alternator pivot bolt and adjusting bolt, and remove the drive belt.


b.

Remove the 4 bolts, fan, fan spacer and pulley.


Hide 16577C 4.REMOVE RADIATOR PIPE

a.
A424224

Remove the 2 bolts.


b.

Disconnect the radiator hose from the water pump, and remove the radiator pipe.


Hide 16100 5.REMOVE WATER PUMP

a.
A424225

w/ ACSD:

Disconnect the water bypass hose (1) from the union on the water pump.


b.

Remove the 5 bolts.


c.

Disconnect the water bypass hose (2) from the water pump, and remove the water pump and gasket.