Home › Engine / Hybrid System › 14B (ENGINE MECHANICAL) › CYLINDER BLOCK › 2017.01–2019.08
RM2850E _51 Engine / Hybrid System _073170 14B ENGINE MECHANICAL _0356054 CYLINDER BLOCK A

14B ENGINE MECHANICAL  CYLINDER BLOCK  VALVE LIFTER AND VALVE LIFTER BORE INSPECTION  


PROCEDURE

Hide 1.INSPECT VALVE LIFTER OIL CLEARANCE

a.
A424160

Using a cylinder gauge, measure the valve lifter bore diameter.

Bore diameter:

27.010 - 27.030 mm (1.0634 - 1.0642 in.)



b.

Using a micrometer, measure the valve lifter diameter.

Lifter diameter:

26.955 - 26.975 mm (1.0612 - 1.0620 in.)



c.
A424161

Subtract the valve lifter diameter measurement from the valve lifter bore diameter measurement.

Standard oil clearance:

0.035 - 0.075 mm (0.0014 - 0.0030 in.)


Maximum oil clearance:

0.10 mm (0.0039 in.)


If the oil clearance is greater than maximum, replace the valve lifters.