Home › Engine / Hybrid System › 14B (ENGINE MECHANICAL) › A/C IDLE-UP SPEED › 2017.01–2019.08
RM2850E _51 Engine / Hybrid System _073170 14B ENGINE MECHANICAL _0356057 A/C IDLE-UP SPEED A

14B ENGINE MECHANICAL  A/C IDLE-UP SPEED  INSPECTION AND ADJUSTMENT  


PROCEDURE

Hide 1.INITIAL CONDITIONS

a.

Engine at normal operating temperature


b.

Air cleaner installed


c.

All accessories switched OFF


d.

All vacuum lines properly connected


e.

Valve clearance set correctly


f.

Injection timing set correctly


g.

w/ PS Idle-Up System:

Steering wheel at straight-ahead position


h.

Idle speed set correctly


i.

w/ PS Idle-Up System:

PS idle-up speed correctly


Hide 2.CONNECT TACHOMETER

Hide 3.INSPECT AND ADJUST A/C IDLE-UP SPEED

A429055

a.

Start the engine.


b.

Turn the A/C switch ON, and set these position:

·

Blower switch to HI

·

Air intake control lever to RECIRCULATED AIR

·

Air flow control lever to FACE

·

Temperature control lever to COOL



c.

Check the idle-up speed.

A/C idle-up speed:
3B for BB:

700 - 750 rpm

14B for BB:

775 - 825 rpm

3B, 14B, 15B-F, 15B for BU:

900 - 1,000 rpm



d.
A429056

Loosen the lock nut, and adjust the idle-up setting speed by turning the idle-up speed adjusting screw. Lock the adjusting screw with the lock nut.


e.

Turn the A/C switch OFF, then ON again, and recheck the idle-up speed.


f.

Turn the A/C switch OFF, and check that the rod end of the idle-up actuator is not touching the idle-up lever.