Home › Engine / Hybrid System › 14B (LUBRICATION) › LUBRICATION SYSTEM › 2017.01–2019.08
RM2850E _51 Engine / Hybrid System _073172 14B LUBRICATION _0356060 LUBRICATION SYSTEM G

14B LUBRICATION  LUBRICATION SYSTEM  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.CHECK ENGINE OIL QUALITY

a.
A424252

Check the oil for deterioration, entry of water, discoloring or thinning.

If the quality is visibly poor, replace the oil.

Oil grade:

API grade CD or better


Recommended viscosity:

Refer to Illustration



Hide 2.CHECK ENGINE OIL LEVEL

a.

The oil level should be between the "L" and "F" marks on the dipstick.

If low, check for leakage and add oil up to "F" mark.


Hide 83530 3.REMOVE OIL PRESSURE SWITCH

a.
A424253

Using SST, remove the oil pressure switch.

SST
09816-30010  


Hide 4.INSTALL OIL PRESSURE GAUGE

Hide 5.WARM UP ENGINE

a.

Allow the engine to warm up to normal operating temperature.


Hide 6.CHECK OIL PRESSURE

A424254

Oil pressure:
At idle:

29 kPa (0.3 kgf/cm2, 4.3 psi) or more

At 3,000 rpm:

250 - 588 kPa

(2.5 - 8.0 kgf/cm2, 36 - 85 psi)


Hide 7.REMOVE OIL PRESSURE GAUGE

Hide 83530 8.REINSTALL OIL PRESSURE SWITCH

a.
A420911

Apply adhesive to 2 or 3 threads of the oil pressure switch.

Adhesive:

TOYOTA Genuine Adhesive 1344, Three Bond 1344 or equivalent



b.

Using SST, install the oil pressure switch.

SST
09816-30010  


Hide 9. START ENGINE, AND CHECK FOR OIL LEAKS